There are different types of oil skimmers used for different applications:

Belt Type Oil Skimmer

These are mainly used where recovery of fluid is important. This is mounted vertically in the tank. The belt is running vertically between two shafts. Oil sticks to the belt & is scraped out when it comes above the tank.

Tube Type Oil Skimmer

These are mainly used to remove oil from big tanks. Tube floats on the surface of the fluid & oil sticks to the tube. Tube rotates continuously with the help of geared drive. Oil is continuously scraped out.

Hydro Cyclone Type Oil Skimmers

It's nothing but a pump. It handles very high volumes of oil. Some fluid goes out along with the scum.

Pan Type Oil Skimmers

It is nothing but a bucket elevator. Buckets are tied between the chain & rotating continuously with the help of geared drive. The oil is collected in buckets & conveyed to the collecting bin. These buckets are made of perforated steel & covered with fine mesh to retain oil & recover fluid.

Disc Type Skimmer

A stainless steel disc is rotated continuously with the help of geared drive. Oil sticks to the disc & scraped continuously. This could be used for small tanks. Dry zone above fluid level should not be more thatn 200mm.

We are manufacturer of

Spindle cooling units for grinding machines. Hydraulic oil coolers. Process chillers for cooling of cutting fluids like water based emulsion, neat cut oils etc. Cooling of rolling, welding machines.

The range starts from 900 Kcal/hr to 90,000 Kcal/hr.